Quick and Dirty Acoustic Guitar Removeable Pickup

img_1274img_1324

I needed a pickup that I could easily install and remove from guitar to guitar—this is what I created with few spare parts I had laying around.

img_1269

I grabbed a Lego crate and lid got the housing and a RCA jack for the connection. The active agent is a piezo disk that I broke out of a buzzer housing.

img_1270

Drilled a hole in the bottom of the crate and installed the RCA jack.

img_1271

Then, I drilled a hole in the  lid and inserted the piezo wires.

img_1272

Next, I soldered the wires to the hot and ground terminals on the RCA jack and closed the crate.

img_1273

To allow for easy installation and removal, I added a 3/8″ removable Glue Dot to  the back of the piezo disk and one side of the Lego Crate. Done.

It needs some more sound shaping, but it has potential and is decent in a pinch.

Check out my video:

Thanks,

img_1926-2

 

Advertisements